Shower Doors Enclosures

Custom Bathroom Glass · New York City

Custom Shower Doors & Enclosures in NYC

Measured-to-fit frameless shower doors, fixed glass panels, sliding systems, tub screens, and complete shower enclosures for New York City homes, apartments, hotels, and renovation projects.

Custom frameless shower door with brass hardware installed in New York City
Measured, fabricated, and installed around the opening, tile, hardware, door movement, and bathroom layout.
Design Custom Measured
Systems Frameless & Framed
Glass Tempered Safety Glass
Coverage All Five NYC Boroughs

Built Around the Bathroom

Clean lines begin with accurate measurements and disciplined detailing.

A custom shower enclosure should fit the finished opening, support the intended door movement, control water, and work naturally with the bathroom layout. Glass size, panel alignment, hardware placement, tile conditions, curb slope, wall plumb, and nearby fixtures all affect the final result.

NYC ALL GLASS field-measures each project and coordinates the glass, hardware, supports, clearances, and installation conditions as one system. We work with homeowners, designers, architects, contractors, property managers, and hospitality teams throughout New York City.

Custom Means Site-Specific

The enclosure is planned around actual finished conditions—not a standard opening. Measurements should be taken after the tile, curb, walls, and surrounding finishes are complete and ready for glass.

Shower Glass Systems

Six configurations for different openings and bathrooms.

The best system depends on the opening width, available door swing, curb or shower base, plumbing fixtures, support conditions, access, and the visual character of the room.

Frameless glass shower enclosure installed in NYC

Frameless Shower Enclosures

Minimal-hardware systems with clean glass edges, custom panels, and site-specific door and support coordination.

Custom Glass
Walk-in glass shower enclosure in New York City

Walk-In Shower Glass

Fixed panels and open-entry configurations designed for modern walk-in showers and carefully planned splash control.

Open Entry
Custom sliding glass shower doors installed in NYC

Sliding Shower Doors

Sliding and bypass systems for bathrooms where a swinging door would conflict with fixtures or circulation.

Space Efficient
Hinged frameless glass shower door in NYC

Hinged & Pivot Doors

Custom swinging doors coordinated with the opening, hinges, handle, seals, swing clearance, and adjacent panels.

Custom Swing
Bathtub glass shower screen installed in New York City

Bathtub Glass Screens

Fixed or operable glass screens that create a cleaner alternative to a shower curtain around compatible tubs.

Tub Glass
Custom corner glass shower enclosure in NYC

Corner & Inline Enclosures

Multi-panel systems for corner, return-panel, neo-angle, and inline shower openings with coordinated supports.

Multi-Panel

Glass & Hardware Selection

Every visible detail should belong in the room.

The glass and hardware should work with the tile, plumbing fixtures, cabinetry, lighting, and overall bathroom finish. We coordinate the technical requirements without losing the visual intent.

Glass Options

Clear, low-iron, patterned, frosted, or privacy glass where appropriate and available.

Hardware Finishes

Chrome, brushed nickel, matte black, brass tones, and other project-specific finishes.

Door Operation

Hinged, pivot, sliding, bypass, or fixed-panel arrangements based on the opening.

Support Details

Clamps, channels, headers, hinges, handles, support bars, seals, and required clearances.

Finish Coordination

Alignment with tile joints, curbs, benches, knee walls, niches, ceilings, and bathroom fixtures.

Custom shower enclosure glass and hardware finish detail in NYC

Where We Work

Custom shower glass for homes, renovations, and hospitality spaces.

Each property creates different access, protection, scheduling, fabrication, and installation requirements. The enclosure must be designed around both the bathroom and the building.

Manhattan Apartments

Custom enclosures for condominiums, co-ops, penthouses, and apartment renovations.

Townhouses & Brownstones

Primary bathrooms, guest baths, lower-level bathrooms, and full townhouse renovations.

New Construction

Measured shower-glass packages coordinated with contractors, designers, and project schedules.

Bathroom Renovations

Replacement and new enclosures installed after tile and surrounding finishes are completed.

Hotels & Hospitality

Guest-room shower glass and specialty bathroom installations with repeatable finish standards.

Multifamily Properties

Individual apartment work, renovation programs, model units, and property upgrades.

Our Process

From finished opening to final adjustment.

Custom shower glass should be measured after the surrounding finishes are complete. This reduces assumptions and allows the enclosure to respond to real dimensions, wall conditions, and hardware clearances.

Project Review

Discuss

Review the bathroom layout, enclosure type, design intent, access, timeline, and finish preferences.

Field Conditions

Measure

Document the finished opening, wall alignment, curb, tile, door swing, fixtures, and support conditions.

Selections

Coordinate

Confirm glass, hardware, finish, handle, hinges, channels, supports, and enclosure configuration.

Production

Fabricate

Prepare the custom tempered-glass panels and required hardware from the approved measurements.

Completion

Install

Set the panels, adjust the door, complete seals and hardware, and review operation and alignment.

Shower Glass Details

Frameless enclosures, sliding systems, fixed panels, tub screens, and custom hardware configurations for New York City bathrooms.

Custom shower-glass service across all five boroughs.

Manhattan Brooklyn Queens The Bronx Staten Island

Shower Door FAQs

What to know before ordering custom shower glass.

Accurate measurements and finished site conditions are essential. These are the questions we hear most often from NYC homeowners, contractors, and designers.

When should shower-glass measurements be taken?

Measurements should generally be taken after the tile, curb, walls, ceiling conditions, and surrounding finishes are complete. Measuring finished conditions helps the custom glass and hardware respond accurately to the actual opening.

What is the difference between frameless and framed shower doors?

Frameless systems use heavier glass and minimal perimeter framing for a cleaner appearance. Framed systems use more continuous metal support. The appropriate system depends on the opening, glass configuration, budget, support requirements, and design preference.

Can you install sliding shower doors in a small bathroom?

Yes, when the opening width and shower configuration support a sliding or bypass system. Sliding doors can be useful where a hinged door would interfere with a toilet, vanity, towel bar, or circulation path.

Can shower glass be installed on an out-of-plumb wall?

Many existing walls are not perfectly plumb. Custom measurement can account for reasonable variations, but severe conditions may require corrective work or a different glass and hardware configuration.

Is frameless shower glass completely waterproof?

No shower enclosure is an aquarium. Frameless systems use small clearances so doors and panels can operate. Proper curb slope, shower-head placement, seals, panel layout, and installation help control water, but the bathroom design must also support the enclosure.

What glass and hardware finishes are available?

Options may include clear, low-iron, patterned, frosted, or privacy glass, together with chrome, brushed nickel, matte black, brass-tone, and other hardware finishes. Availability depends on the selected system and project requirements.

How long does a custom shower enclosure take?

Timing depends on field measurement, glass type, hardware, fabrication requirements, approvals, and installation scheduling. A project-specific timeline can be provided after measurements and selections are confirmed.

Do you work with contractors, designers, and architects?

Yes. NYC ALL GLASS works directly with homeowners as well as general contractors, bathroom remodelers, interior designers, architects, property managers, and hospitality teams throughout New York City.

Planning a Railings or Interior Glass Project in NYC?